Click image to view full size image
Description:
1.modle: JG-2C2L2.use: to blow plastic bottles
3.capacity: 2000 bottle / hr base on 500ml
4.suitable bottle:100ml-2000ml
l High safety, high speed with high efficiency.
l Manual saving, one man is enough for operating the machine.
l Stable performing with easy maintaining.
l imported PLC controller and man-machine interface computer.
l Japan OMORN inspection sensor.
l Adopt the new type double bend arm and four pull rod clamping structure (won the patent): cross direction, middle mould board is move parallel. The distance between two mould board is adjusted by the chain wheel. Thus, the clamping force is very strong.
l Power saving design that can increase your profits.
l Segregate type air contolling system, which is designed for avoiding waste pollution.
Technical Parameter:
Container Specification | |
Theoretical output | 2200pcs/hr |
Max. container volume | 2L |
Max. neck diameter | 45mm |
Max. container diameter | 100mm |
Max. container height | 340mm |
Number of cavity | 2cavity |
Electricity & Air System | |
Total power | 25Kw |
Use power | 15Kw |
Working pressure | 1.0Mpa |
Low pressure consuming | 1400L/min |
Blowing pressure | ≤3.5Mpa |
High pressure consuming | 1200L/min |
Chiller Water & Machine Dimension | |
Operating pressure | 0.3-0.5Mpa |
Temperature | 10-12°C |
Flow rate | 30L/min |
Machine dimension | 1.9×1.6×2.0m |
Weight | 1200kg |
2000bph hand feeding automatic blow moulding machine
